SMC Networks 1000 - Manual (Page 30)

I
NSTALLING THE
S
WITCH
3-2
Equipment Checklist
After unpacking the TigerSwitch 1000, check the contents to be
sure you have received all the components. Then, before
beginning the installation, be sure you have all other necessary
installation equipment.
Package Contents
◆ TigerSwitch 1000 (SMC8606SX) unit
◆ Four adhesive foot pads
◆ Bracket Mounting Kit containing two brackets and four screws
for attaching the brackets to the switch
◆ Power Cord—either US, Continental Europe or UK
◆ This Installation Guide
◆ Management Guide
◆ SMC Warranty Registration Card—be sure to complete and
return to SMC
Optional Rack-Mounting Equipment
If you plan to rack-mount the switch, be sure to have the
following equipment available:
◆ Four mounting screws for each device you plan to install in a
rack—these are not included
◆ A screwdriver (Phillips or flathead, depending on the type of
screws used)