Verifying the software installation, Configuring driver parameters, Configuring vlans – Sun Microsystems GigaSwift Ethernet Adapter User Manual
Page 109
Appendix B
Using the Sun GigaSwift Ethernet Driver in Solaris 9 x86 Operating Systems
87
Verifying the Software Installation
After you have run the automated installation script, check to be sure you have the
current version of the driver installed.
●
Use the
modinfo
command to verify that you have the current driver (v1.137 or
later) installed.
Type
grep CE
, using uppercase letters, to get only the specific driver information:
Configuring Driver Parameters
See Chapter 4, “Configuring Driver Parameters,” for complete instructions.
Configuring driver parameters is the same on both SPARC and Solaris 9 x86
systems.
Configuring VLANs
See Chapter 5, “Configuring VLANs,” for complete instructions. Configuring
VLANs is the same on both SPARC and Solaris 9 x86 systems.
# modinfo |grep CE
84 7821c000 4f9a6 75 1 ce (CE Ethernet Driver v1.137)