Operation with the remote control unit – Sanyo XS4232 User Manual
Page 13
13
OI-201-13EG
Operation with the Remote
Control Unit
1. Operation
NOTE
Check that the circuit breaker on the power panel is turned on and that the
operation selector of the indoor unit is in the ON position.
Press the setting buttons as described below and change the settings as desired.
STEP 1
Set the MODE selector button to COOL.
For cooling operation
→
STEP 2
To start the air conditioner, press the ON/OFF operation
button.
STEP 3
Press the TEMP. setting buttons to change the temperature
setting to the desired temperature.
Adjustable temperature range:
86
°F max.
60
°F min.
NOTE
The temperature setting changes by two degrees each
time the button is pressed. (The air conditioner
remembers the new temperature setting even when it is
turned off.)
STEP 4
Set the FAN SPEED selector button to the setting you
want.
NOTE
If the fan speed is set to
(Automatic), the fan speed
switches automatically, according to the difference
between the actual room temperature and the
temperature setting.
STEP 5
Press the FLAP button and set the airflow direction as
desired.
(Refer to ‘‘Adjusting the Airflow Direction’’ on page 20.)
To stop the air conditioner, press the ON/OFF operation button again.
STEP 4
STEP 3
STEP 2
STEP 1
STEP 5