Samsung SCQ-041AP - Manual (Page 22)

User’s Guide
10
Mounting the SCQ-041P in a Rack
The is a standard 19-inch electronic equipment rack. If you intend to
mount the SCQ-041P in a rack, do as following:
1. Remove the mounting screws from their holes and align each Rack
mounting adaptor vertically along the front edge of the SCQ-041P
enclosure.
2. Insert the mounting screws through each mounting adaptor and into
the corresponding screw holes on the SCQ-041P.
3. Partially tighten the screws so that they are holding the adaptor
loosely in place.
4. Adjust the mounting adaptor the front of the adaptor is flush with the
front panel of the SCQ-041P enclosure.
5. Tighten the mounting screws so that the adaptor is firmly attached to
the SCQ-041P enclosure. Be careful not to over tighten the screws.
6. Repeat the procedure described above to attach the remaining
adaptor to the other end of the SCQ-041P enclosure.
DIGITAL
COLOR QUAD SWITCHER
SCQ-041P
POWER
CHARACTER
SELEC T MENU
SETUP
ENTER
RESET
LIST
ON
OFF AUTO SWITCHER
1
2
3
4 1
2
3
4
SINGLE DISPLAY
QUAD DISPLAY
FREEZE
SYSTEM SETUP
ALARM
1 2
3 4