Samsung SCQ-041AP - Manual (Page 29)

Chapter 4
17
Channel Title Setting
If not in the system setup mode, press the “SETUP” button to enter the
system setup mode.
When video signals are input to the 4 channels, the title of each channel
can be indicated by up to 8 letters in which alphabets, digits, and special
characters can be combined. Set a channel title as shown below.
Press the “MENU” button on the main menu screen to place the “ Ǟ”
sign to the side of the “1 CHANNEL TITLE SET”. Then press the
“ENTER” button to show the sub screen for setting a channel title as
shown below.
At this point, you can enter letters on the position of the blinking cursor.
• Move the position of “
Ǟ” by pressing the “MENU” button.
• Move the position of the cursor by pressing the “SELECT” button.
• A letter to be entered on the position of the cursor can be selected by
pressing the “ ǟ CHARACTER” or “CHARACTER Ǟ” button.
The letters that can be entered are shown in the Character Table above.
<CHANNEL TITLE SET>
→
1. CHANNEL1: ■ ■ ■ CH1 ■ ■
2. CHANNEL2: ■ ■ ■ CH2 ■ ■
3. CHANNEL3: ■ ■ ■ CH3 ■ ■
4. CHANNEL4: ■ ■ ■ CH4 ■ ■
[CHARACTER TABLE]
■ ABCDEFGHIJKLMNOPQ
R STUVWXYZ0123456789;
/ · < > . – ,