Sanyo SANUPS E11A102A - Manual (Page 21)

− 18 −
8. Preparations Before Operation
Check the following items before starting operation:
① Visually inspect the UPS to verify that there is no visible damage.
② Check that the UPS is connected to a utility power source that meets the input
specifications.
③ Check that the input switch MAIN SW is set to “OFF”.
④ Check that load devices are connected correctly.
⑤ Check that none of the connections is loose.
BATT
EXT.
MAIN SW
② , ⑤Check input
power source
④ , ⑤Check load
connections.
③ Switch is “OFF”.