Radio, Memorizing only the desired stations, Receiving the memorized stations – Sony XR-CA420X User Manual
Page 9: Memorizing stations automatically, Best tuning memory (btm)
9
9
Radio
Memorizing stations
automatically
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest
signals and memorizes them in the order of
their frequencies.
You can store up to 6 stations on each band
(XR-CA420X: FM1, FM2, FM3, AM1, and AM2)
(XR-CA420: FM1, FM2, FM3, MW, SW1, and
SW2).
Caution
When tuning in stations while driving, use
Best Tuning Memory to prevent accidents.
1
Press (SRC) repeatedly to select the
tuner.
Each time you press (SRC), the source
changes as follows:
B
TUNER B CD*
1
TAPE*
2
b
MD*
1
b
*
1
If the corresponding optional equipment is
not connected, this item will not appear .
*
2
If a tape is not inserted, this item will not
appear.
2
Press (MODE) repeatedly to select the
band.
Each time you press (MODE), the band
changes as follows:
XR-CA420X:
B
FM1 B FM2 B FM3
AM2 b AM1 b
XR-CA420:
B
FM1 B FM2 B FM3
SW2 b SW1 b MW b
3
Press (BTM) for two seconds.
The unit stores stations in the order of their
frequencies on the number buttons.
A beep sounds when the setting is stored.
Notes
• The unit does not store stations with weak
signals. If only a few stations can be received,
some number buttons will retain their former
setting.
• When a number is indicated in the display, the
unit starts storing stations from the one currently
displayed.
Memorizing only the
desired stations
XR-CA420X:
You can preset up to 18 FM stations (6 each for
FM1, 2, and 3) and up to 12 AM stations (6
each for AM1 and 2) in the order of your
choice.
XR-CA420:
You can preset up to 18 FM stations (6 each for
FM1, 2, and 3), up to 6 MW stations, and up to
12 SW stations (6 each for SW1 and 2) in the
order of your choice.
1
Press (SRC) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
band.
3
Press either side of (SEEK/AMS) to tune
in the station that you want to store on
the number button.
4
Press the desired number button ((1) to
(6)) until “MEM” appears.
The number button indication appears in
the display.
Note
If you try to store another station on the same
number button, the previously stored station will
be erased.
Receiving the memorized
stations
1
Press (SRC) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
band.
3
Press the number button ((1) to (6)) on
which the desired station is stored.
continue to next page t