Obile, Mc55 at command set – Siemens MC55 User Manual
Page 468
MC55 AT Command Set
19.7 Alphabetical List of AT Commands
s
m
obile
MC55_ATC_V01.05
Page 468 of 469
2/10/04
Confidential / Released
SAT Get Information
SAT Response
Configure SYNC Pin
Display Total Call Duration
Answer a call
Manual response to a network request for PDP context
activation
Mobile originated call to dial a number
Request GPRS IP service
Request GPRS service
Originate call to phone number in memory
Originate call to phone number selected from active mem-
ory
Originate call to phone number in memory with corre-
sponding field
Mobile originated call to dialable ISDN number <n>
Redial last telephone number used
Enable command echo
Disconnect existing connection
Manual rejection of a network request for PDP context
activation
Display product identification information
Set monitor speaker loudness
Set monitor speaker mode
Switch from command mode to data mode / PPP online
mode
Select pulse dialing
Set result code presentation mode
Set number of rings before automatically answering the
call
Automatic response to a network request for PDP context
activation
Set disconnect delay after indicating the absence of data
carrier
Extended call release report
Write command line termination character
Set response formatting character
Write command line editing character
Set pause before blind dialing
AT Command
Description
Chapter and Page