Sony RDR-HX780 - Manual (Page 24)

24
Code numbers of controllable TVs
The remote performs the following:
If the supplied remote interferes with your
other Sony DVD recorder or player, set the
command mode number for this recorder
and the supplied remote to one that differs
from the other Sony DVD recorder or player
after you have completed “Step 6: Easy
Setup.”
The default command mode setting for this
recorder and the supplied remote is “3
(Default setting).”
You can check the current Command Mode
in the front panel display. For details, see
page 109.
You can change channels of the recorder
using the number buttons.
Example: for channel 50
Press “5,” “0,” then press ENTER.
Manufacturer Code number
Sony 01 (default)
Hitachi 02, 04
LG/Goldstar 04
Mitsubishi/MGA 13, 04
NEC 04
Panasonic 19
Philips 21
Pioneer 16
RCA 10, 04
Samsung 20, 04
Sharp 18
Toshiba 07, 18
Buttons Operations
TV [/1 Turns your TV on or
off.
TV VOL +/– Adjusts the volume
of your TV.
TV CH +/– Selects the channel
on your TV.
TV INPUT (input
select) Switches your TV’s
input source.
If you have a Sony DVD player
or more than one Sony DVD
recorder
The default command mode setting for this
recorder and the supplied remote is “3
(Default setting).”
The remote does not function if different
command modes are set for the recorder
and remote. Set the same command mode.
Changing channels of the
recorder using the remote