Sony GRAND WEGA KDF-60XBR950 - Manual (Page 14)

Introducing the Sony LCD Projection TV
14
1
Turn off the power switch on the LCD projection TV and after several
minutes, unplug the power cord.
(The cooling fan will continue to blow for about two minutes after
turning the power off.)
2
Unplug the power cord after turning off the main power. Wait at least 30
minutes to allow the lamp to cool down before replacing it.
Take the new lamp out of the box.
3
Remove the control panel cover.
✍
Do not touch the front glass of a new lamp or the glass of the lamp
receptacle. This may reduce picture quality or lamp life.
Loosen the screw in the right underneath with a
coin or similar object and remove the control
panel cover.
Push and release the center in the upper of the
control panel cover to open it.