Sony GRAND WEGA KDF-60XBR950 - Manual (Page 27)

Installing and Connecting the LCD Projection TV
27
In
sta
lling
and
Conne
ctin
g the
LCD Pr
o
jec
tion T
V
Notes on Using This Connection
To Do This ... Do This ...
Switch the TV’s input between
the cable and antenna
Press ANT to switch back and forth between the
TV’s VHF/UHF and CABLE inputs.
✍
It is highly recommended to connect the antenna using a 75-ohm coaxial
cable to get optimum picture quality. A 300-ohm twin lead cable can be
easily affected by radio noise and the like, resulting in signal
deterioration. If you use a 300-ohm twin lead cable, keep it away as far
as possible from the LCD projection TV.
✍
Do not use an indoor antenna because it is especially susceptible to
radio noise.