Sanyo PLC-XC56 - Manual (Page 41)

1
ENGLISH
Setting up the projector
Item Description
Key lock .................. Sets the prohibition of controls either
Projector or Remote control. (OFF,
Projector keys, Remote control)
Lamp Corres.
Value(h) .................. Displays the lamp use time
(Corresponding value) . Reset the time
after lamp replacement. Click "Reset", a
confirmation display appears, and then
click "OK", the time will be reset.
Filter
counter(h) ............ Displays the filter counter. Reset the time
after filter cartridge replacement. Click
"Reset", a confirmation display appears,
and then click "OK", the time will be
reset.
Scrolls
remaining ............. Displays the scrolls remaining of the filter. Reset the scroll counter after filter car-
tridge replacement. Click "Reset", a confirmation display appears, and then click "OK",
the time will be reset.
Filter control ....... Scroll the filter. Click "Roll-up", a confirmation display appears, and then click "OK", the
filter will be scrolled.
Filter warning..... Sets the time to indicate the filter warning message on the screen. (OFF, 400H, 700H,
1000H)
Factory default .......... Sets all of the projector control items to the factory default setting except the fol-
lowing items.
Lamp Corres. Value, PJ time, Network PIN code, Network setting
* This function is not effective for the settings of Network address settings, e-mail
settings, etc.
No show ................. Sets the black out image temporarily. (ON, OFF)
Freeze ...................... Sets the image to freeze mode. (ON, OFF)
Closed caption .. Sets the closed caption function.
Closed caption ... Sets the closed caption mode. (OFF, CC1, CC2, CC3, CC4)
Color ..................... Sets the color of the contents. (Color, White)
Setting 3