Sanyo PLC-XC56 - Manual (Page 42)


Chapter 4 Controlling the Projector
Information
This page is to display the basic information of the projector status. Click
Information on the main menu.
Items Description
Input Displays selected input and source.
System Displays selected signal system.
Signal Input signal status (Yes, No)
Screen Displays screen mode.
Lamp status Displays lamp status with an animation. Refer to the table as shown in the
next page.
Security Displays the security (PIN code lock) status (Yes, No)
PJ time(h) Displays the accumulated use time of the projector.
Lamp Corres. Value(h) Displays the use time (Corresponding value) of the lamp.
Filter time(h) Displays the accumulated use time of the filter.
Filter condition Displays filter status with an animation. Refer to the table as shown in the
next page.
Click this button to
update the information.