Getting started, Unpacking, Inserting batteries into the remote – Sony DAV-EA20 User Manual

Page 11: Unpacking inserting batteries into the remote

Advertising
background image

Ge
tting Star

te

d

11

GB

Check that you have the following items:

• Speakers (5)

• Subwoofer (1)

• AM loop aerial (1)

• FM wire aerial (1)

• Video cord (1)

• Speaker cords (5m

×

4, 15m

×

2)

• Remote Commander (remote) (1)

• R6 (size AA) batteries (2)

• Foot pads (20)

• EURO AVadapter (1)

You can control the system using the supplied
remote. Insert two R6 (size AA) batteries by
matching the 3 and # ends on the batteries to
the markings inside the compartment. When
using the remote, point it at the remote sensor

on the system.

Notes

• Do not leave the remote in an extremely hot or humid

place.

• Do not use a new battery with an old one.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not expose the remote sensor to direct light from

the sun or lighting apparatus. Doing so may cause a
malfunction.

• If you do not use the remote for an extended period of

time, remove the batteries to avoid possible damage
from battery leakage and corrosion.

Using the Remote

When you use the system, ensure that you have
the COMMAND MODE switch set to
SYSTEM. When setting to TV, you can control
the TV (page 51).

Getting Started

Unpacking

Inserting Batteries into
the Remote

1

2

3

4

5

6

7

>10

10/0

8

9

COMMAND
MODE switch

Advertising