Sony DAV-EA20 - Manual (Page 17)

Ge
tting Star
te
d
17 GB
Required cords
Video cord for connecting a TV
Audio/video cords (not supplied)
When connecting a cord, be sure to match the colour-coded sleeves to the appropriate jacks on the
components.
Terminals for connecting video components
Notes
• When you select VIDEO using the FUNCTION button, the signal is not from the VIDEO OUT and AUDIO OUT
L/R jacks.
• When you use the video line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH STEREO
mode, the line outputs may not function properly.
• When the system is set to “DVD” mode, the signal is output from the S VIDEO OUT jack.
• When recording on another unit connected to the AUDIO OUT jacks, do not change the Sound Field (page 41) of
connect/disconnect headphones.
• When you connect the digital satellite receiver to the VIDEO jacks of this unit, change the function from VIDEO
to SAT (satellite) (page 52).
Tip
When using the S video jack instead of the video jacks, your TV monitor must also be connected via an S video jack.
S video signals are on a separate bus from the video signals and will not be output through the video jacks.
Step 3: TV and Video Component Hookups
Connect the To the
TV MONITOR OUT jacks
VCR VIDEO jacks
Digital satellite receiver VIDEO jacks
Yellow
Yellow (Video)
White (L/audio)
Red (R/audio)
continued