Samson Sub120 - Manual (Page 7)

SUB 120 Layout
6
Rear Panel Layout
SAMSON
PHASE
OFF
AUTO ON
POWER
PROTECT
VOLUME
FROM EXTERNAL AMPLIFIER
SPEAKER OUTPUT
TO PASSIVE SATELLITE SPEAKERS
SWEEP Hz
PREAMP LEVEL
INPUT OUTPUT 70
40 180
5
0 10
+ - L R - +
ON 0 ° 180 °
+ - L R - +
R R
L L
NOT SUITABLE FOR IN-WALL MOUNTING
FUSE
MADE IN CHINA 230VAC
DESIGNED AND ENGINEERED IN THE
UNITED STATES BY SAMSON TECHNOLOGIES
SUB120 120 WATT 10" SUBWOOFER
115VAC
www.samsontech.com
CAUTION
RISK OF ELECTRICAL SHOCK DO NOT OPEN RISQUE DE SHOCK ELECTRIQUE
NE PAS OUVRIR
SERIAL NUMBER :
CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT REMOVE BOTTOM COVER NON SERVICEABLE PARTS INSIDE
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE REFER SERVICING TO QUALIFIED PERSONNEL
1 2 4 5
12
8 9 6 7
13 10 11
3
1 VOLUME - Controls the amount of output
level.
2 SWEEP HZ - Adjusts the low frequency end
range of the High-Pass outputs.
3 POWER/PROTECT LED - Indicates power is on
and if amplifier is in Protect mode.
4 AUTO SLEEP SWITCH - When activated, Sleep
Mode conserves power by automatically
turning unit into standby mode after 10 min-
utes of non-use.
5 PHASE SWITCH - Allows for 180 degrees out-
of-phase operation.
6 PREAMP LEVEL INPUT - Accepts Line Level
input signals from mixer .
.
7 PREAMP LEVEL OUTPUT - Sends Low Level
Output signal.
8 SPEAKER LEVEL INPUT- Accepts full range
signals from power amplifier.
9 SPEAKER LEVEL OUTPUT- Sends full range
signals to satellite speakers.
10 HEAT SINK - Provides cooling of internal
power amplifier.
11 SERIAL NUMBER - Unit serial number is
located here.
12 FUSE - User accessible fuse.
13 POWER CORD - Heavy duty power cord.