Sony DAV-BC250 - Manual (Page 27)

Ge
tting Star
te
d
27 GB
Narrows the DYNAMIC range of the sound
track.
Useful for watching movies at low volume late
at night.
Note
DYNAMIC range compression only applies to Dolby
Digital sources.
Adjusting the speaker
balance and level by using the
test tone
1
Press AMP MENU.
2
Press X / x until “LEVEL” appears in the
front panel display, then press ENTER
or
c .
The system enters the Level Menu mode.
3
Press X / x repeatedly to select
“T.TONE” in the front panel display,
then ENTER or
c .
4
Press X or x to select “T.TONE ON” in
the front panel display.
You will hear the test tone from each
speaker in sequence.
When you select “T.TONE OFF,” this
operation will be cancelled.
5
Press C to return “T.TONE”.
6
Press X / x to select the item you want to
set, then press ENTER or c .
7
Press X / x to adjust the speaker setting
value.
Press C to return step 6 and follow steps 6
and 7 to adjust other speaker setting values.
8
Set “T.TONE” to “T. TONE OFF” to
cancel the test tone function.
Test tone sound stops emitting.
9
Press AMP MENU when you have
finished making adjustments.
Note
When you adjust the speaker settings, the sound cuts
off for a moment.
AUDIO DRC DRC OFF: No compression of
DYNAMIC range.
DRC STD: Reproduces the sound
track with the kind of DYNAMIC
range that the recording engineer
intended.
DRC MAX: Fully narrows the
DYNAMIC range.