Getting started, Unpacking, Inserting batteries into the remote – Sony DAV-BC250 User Manual

Page 13: Unpacking inserting batteries into the remote

Advertising
background image

Ge
tting Star

te

d

13

GB

Check that you have the following items:

• Speakers (5)

• Subwoofer (1)

• AM loop antenna (1)

• FM wire antenna (1)

• Speaker cords (3.5 m

× 3, 10 m × 2)

(11.5 ft.

× 3, 33 ft. × 2)

• Video Cord (1)

• Remote Commander (remote) RM-SS250 (1)

• Size AA (R6) batteries (2)

• Foot pads

DAV-BC150 (15)
DAV-BC250 (10)

• Operating Instructions

• Speakers-connection and Installation (card)

(1)

You can control the system using the supplied
remote. Insert two Size AA (R6) batteries by
matching the 3 and # ends on the batteries to
the markings inside the compartment. When
using the remote, point it at the remote sensor

on the system.

Notes

• Do not leave the remote in an extremely hot or humid

place.

• Do not use a new battery with an old one.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not expose the remote sensor to direct light from

the sun or lighting apparatus. Doing so may cause a
malfunction.

• If you do not intend to use the remote for an extended

period of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.

Getting Started

Unpacking

Inserting Batteries into
the Remote

Advertising
This manual is related to the following products: