Sony DAV-BC250 - Manual (Page 31)

Pla
y
ing D
iscs
31 GB
When you stop the disc, the system remembers
the point where you pressed x and “RESUME”
appears in the front panel display. Providing you
do not remove the disc or change other disc
pressing DISC SKIP on the remote or DISC 1 –
DISC 5 of the system, Resume Play will work
even if the system enters standby mode by
pressing [/1 (except MP3).
1
While playing a disc, press x to stop
playback.
“RESUME” appears in the front panel
display, so you can restart the disc from the
point where you stopped the disc.
If “RESUME” does not appear, Resume
Play is not available.
2
Press H .
The system starts playback from the point
where you stopped the disc in Step 1.
Notes
• Depending on where you stop the disc, the system
may not resume playback from exactly the same
point.
• The point where you stopped playing is cleared if
you change the setting on the Setup Menu.
Tip
To play from the beginning of the disc, press x twice,
then press H.
Resuming Playback from
the Point Where You
Stopped the Disc
(Resume Play)
4 5
8
0
6
7
10
9
H x