Sun Microsystems SOLARIS 10 User Manual

Page 94

Advertising
background image

Version 3.1-en

Solaris 10 Container Guide - 3.1 5. Cookbooks

Effective: 30/11/2009

5.2.7.5. Zones in separate networks using exclusive IP instances
[dd] Two local zones, zone1 and zone2, are located in separated networks and provide services for
other networks.

−

Each local zone should have its own physical interface in the network.

−

Additional networks are connected to the network segment.

−

Routing is used.

−

There should be no communication between local zones.

−

Communication between the global zone and the local zones is not intended.

Implementation:

•

A separate GLDV3 interface (e.g. bge1 and bge2) is provided for each zone. These
interfaces must not be used elsewhere in the global zone.
zone1-zonecfg: add net physical=bge1
zone2-zonecfg: add net physical=bge2

•

The zone configuration for zone1 and zone2 is converted to the use of exclusive IP
instances.
zonecfg: set ip-type=exclusive

•

In the zones, the IP addresses and the default router are specified in the usual way.
Zone 1: /etc/hostname.bge1
Zone 2: /etc/hostname.bge2
/etc/defaultrouter

•

Through the exclusive IP instances, communication between the zones or between the
zones and the global zone takes place only if corresponding routing entries exist in the zones
and if a physical network connection exists between the zone interfaces.

87

Figure 35: [dd] Zones in separate networks using exclusive IP instances

192.168.201.0

Network

bge0 - 192.168.1.1

ip type: shared

Global Zone

bge2 - 192.168.202.1
Def router - 192.168.202.2

ip type: exclusive

Zone 2

bge1 - 192.168.201.1
Def router - 192.168.201.2

ip type: exclusive

Zone 1

192.168.1.0

Network

192.168.202.0

Network

Advertising