Sony GDM-F400 - Manual (Page 8)

8
Sony GDM-F400/F500 (E,F,S,C2) 3-864-156-22 (1)
Connecting Universal Serial Bus
(USB) compliant peripherals
Your monitor has one upstream and four downstream USB
connectors. They provide a fast and easy way to connect USB
compliant peripheral devices (such as keyboards, mice, printers
and scanners) to your computer using a standardized USB cable.
To use your monitor as a hub for your peripheral devices, connect
the USBs as illustrated below.
1 Turn on the monitor and computer.
2 Connect your computer to the square upstream
connector using the supplied USB cable.
For customers using Windows
If a message appears on your screen, follow the on-screen instructions
and select Generic USB Hub as the default setting.
3 Connect your USB compliant peripheral devices to
the rectangular downstream
USB connectors.
Notes
• Not all computers and /or operating systems support USB
configurations. Check your computer’s instruction manual to see if you
can connect USB devices.
• In most cases, USB driver software needs to be installed on the host
computer. Refer to the peripheral device’s instruction manual for
further details.
• The monitor functions as a USB hub as long as the monitor is either
“on” or in power saving mode.
• If you connect a keyboard or mouse to the USB connectors and then
boot your computer for the first time, the peripheral devices may not
function. First connect the keyboard and mouse directly to the
computer and set up the USB compliant devices. Then connect them to
this monitor.
• Do not lean on the monitor when plugging in the USB cables. The
monitor may suddenly shift and cause injury.
Selecting the on-screen menu
language (LANG)
English, French, German, Spanish, Italian, and Japanese versions
of the on-screen menus are available. The default setting is
English.
1 Press the joystick
See page 11 for more information on using the joystick.
2 Move the joystick to highlight LANG and press
the joystick again.
3 Move the joystick up or down to select a language
and press the joystick again.
• ENGLISH
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
•
: Japanese
To close the menu
Press the joystick once to return to the main menu, and twice to return to
normal viewing. If no buttons are pressed, the menu closes automatically
after about 30 seconds.
To reset to English
Press the RESET button while the LANGUAGE menu is displayed on the
screen.
to USB compliant
peripheral devices
to a USB compliant
computer
to USB compliant
peripheral devices
MENU
EXIT
CENTER
SIZE
GEOM
COLOR
LANG
ZOOM
SCREEN
OPTION
MENU
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
I TA LIANO
LANGUAGE
GDM-F500.book Page 8 Friday, December 4, 1998 3:55 PM