Symbol Technologies AP-5131 - Manual (Page 339)

Command Line Interface Reference 8-45
AP5131>admin(network.wan.nat)> add
Description:
Adds NAT entries.
Syntax:
Example:
admin(network.wan.nat)> add 1 indoors udp 20 29 10.10.2.2
admin(network.wan.nat)> list 1
-----------------------------------------------------------------------------
index name prot start port end port internal ip translation port
-----------------------------------------------------------------------------
1 indoor udp 20 29 10.10.2.2 0
Related Commands:
For an overview of the AP-5131 NAT options available using the applet (GUI), see
Configuring Network Address Translation (NAT) Settings on page 5-19 .
add <idx> <name> <tran> <port1> <port2> <ip> <dst_port>
Sets an inbound network address translation (NAT) for WAN address <idx>, where <name> is the name of the entry
(1 to 7 characters), <tran> is the transport protocol (one of
tcp , udp , icmp , ah , esp , gre , or all ), <port1> is the starting
port number in a port range, <port2> is the ending port number in a port range, <ip> is the internal IP address, and
<dst_port> is the (optional) internal translation port.
delete Deletes one of the inbound NAT entries from the list.
list Displays the list of inbound NAT entries.