Samsung SCH i830 - Manual (Page 174)

174
Section 13
5. Tap Done to exit. The device is added to the Other
profiles. For information about the how to program each
key, see ‘Programming Self-learn Devices” on page 175.
Delete a Device
To remove a device, follow these steps:
1. Launch the Remote Control application.
2. Display the Remote Control Home Screen, if necessary.
3. Tap Options, then tap Delete device.
4. Highlight the device you want to delete from the Delete
device screen, then tap Delete.
5. Tap Yes to confirm that you want to delete the device.
The Delete Device screen displays.
Reset All Devices
To remove all devices added to your profile at the same
time, follow these steps:
1. Launch the Remote Control application.
2. Display the Remote Control Home Screen, if necessary.
3. Tap Options, then tap Reset all. The Reset device
confirmation screen displays.
4. To remove all of the devices you have added, tap Yes or
tap No to cancel.
Note: Removing devices or selecting Reset all does not remove the device
profiles stored in the pre-defined product databases. However, if you add a
device using Self-learn and then remove it, you will have to repeat the
learning and programming steps each time you add the device to your
profiles.