Samsung SCH i830 - Manual (Page 98)

Sect
ion 8
98
5. Tap to exit.
Password Setting
The password option allows you to enable or disable a
password. The available settings are:
• Simple 4 digit - Allows you to set a four digit password using
the on-screen keypad.
• Strong alphanumeric - Allows you to enter a password that
contains letters, numbers, or both.
When a password is configured, there is a “prompt if
device unused” option that allows a length of time range
from 0 minute - 24 hours. When this option is set, you can
continue to use the i830 until the screen turns off due to
inactivity. If the device is inactive for a greater amount of
time than specified in this setting, a password must be
entered when you turn the device back on.
To set the password:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the Personal tab at the bottom of the display.
4. Tap the Password.
5. Tap the check box next to Prompt if device unused for.
6. Use the drop-down menu to select the amount of time
before you are prompted for a password when the i830
is idle.
7. Select either Simple 4 digit password or Strong
alphanumeric password, depending on your preference.