Samsung A790 - Manual (Page 33)

Understand your phone 25
Your phone’s display
The top line of the display is reserved for icons that indicate
network status, battery power, signal strength, and more. The
following table lists some display icons and their descriptions.
Display icons
Signal strength: Always appears when your phone is on
and indicates the current signal strength. More lines indicate
a stronger signal.
Auto Answer: Automatic answer is enabled. Your phone
automatically picks up any calls after the designated time.
GSM (Int’l) mode: Your phone is in GSM (Int’l) mode. GSM
(Int’l) mode is for operation while traveling in non-CDMA
countries.
In Use: Indicates a call in progress. When dialing a number,
this icon flashes until the call connects.
No service indicator: Your phone cannot find a signal
because you’re outside a service area. You cannot make or
receive calls. Wait for a signal or move to an open area to
find a signal. This indicator always appears when you first
turn on your phone and disappears once service is located.
Roaming indicator: Your phone is outside your home area.
While roaming, another wireless provider may be handling
your call. The service rate for the call may be higher than
those made from within your home area. Please refer to
Verizon Wireless for roaming rates. The roaming indicator
will appear when the phone is used in Internat’l (GSM) Mode
outside of the Netherlands. The appearance of the roaming
indicator does not affect your airtime rates when in GSM
mode.
VerizonA790 ver.2.book Page 25 Friday, April 2, 2004 1:54 PM