Sony HTDDW670 - Manual (Page 40)

masterpage:Left
lename[E:\SEM_Janet\Revision_DDW670\J904000_2342216121DDW670_GB\2342216121\G
B09ADD_HT-DDW670-U.fm]
40 GB
model name1[HT-DDW670]
[2-342-216-12(1)]
If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver’s memory may remedy the
problem (page 14). However, note that all
memorized settings will be reset to their factory
settings and you will have to readjust all settings
on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing
the receiver’s memory
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(Models of area code U only)
With 6 ohm loads, both channels driven, from
120 – 20,000 Hz; rated 60 watts per channel
minimum RMS power, with no more than 0.7%
total harmonic distortion from 250 milliwatts to
rated output.
Amplifier section
Power Output
1)
Models of area code U
(6 ohms 1 kHz, THD 10%)
FRONT
2)
: 100 W/ch
CENTER
2)
: 100 W
SURR 2) : 100 W/ch
(6 ohms 100 Hz, THD 10%)
SUB WOOFER
2)
: 100 W
Models of area code CA
(6 ohms 1 kHz, THD 0.7%)
FRONT
2)
: 60 W/ch
CENTER 2) : 60 W
SURR
2)
: 60 W/ch
(6 ohms 100 Hz, THD 0.7%)
SUB WOOFER
2)
: 60 W
(6 ohms 1 kHz, THD 10%)
FRONT
2)
: 100 W/ch
CENTER
2)
: 100 W
SURR
2)
: 100 W/ch
(6 ohms 100 Hz, THD 10%)
SUB WOOFER
2)
: 100 W
Models of area code MX, SP, E51, CEL, CEK
(6 ohms 1 kHz, THD 0.7%)
FRONT
2)
: 50 W/ch
CENTER
2)
: 50 W
SURR 2) : 50 W/ch
(6 ohms 100 Hz, THD 0.7%)
SUB WOOFER
2)
: 50 W
(6 ohms 1 kHz, THD 10%)
FRONT
2)
: 85 W/ch
CENTER
2)
: 85 W
SURR
2)
: 85 W/ch
(6 ohms 100 Hz, THD 10%)
SUB WOOFER
2)
: 85 W
To clear See
All memorized settings page 14
Customized sound fields page 29
Specifications
GB01COV_HT-DDW670-U.book Page 40 Saturday, January 1, 2005 7:54 AM