Sharp SND-5080 - Manual (Page 74)

setup screen
74_ setup screen
Port
From the Setup menu, select the
<Network (
)> tab.
Select <Port>.
Type in each item in the Port menu as
necessary.
Neither the port range between 0 and 1023
nor port 3702 is available.
HTTP port : HTTP port used to
access the camera via the web
browser.
The default is 80(TCP).
VNP Port : Set a port used to transfer video signals with the Samsung protocols.
RTSP Port : Used to transfer videos in the RTSP mode; the default is 554.
VIEWER Port : Used to transfer videos to the Web Viewer; the default is 4520.
The port range of the Web Viewer is between 4502 and 4532. If the VNP port is with this effective
range, the Web Viewer port should be specified the same as the VNP port.
When done, click [Apply].
DDNS
DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of
a camera into a general Host Name so that the user can easily remember it.
From the Setup menu, select the
<Network (
)> tab.
Click <DDNS>.
Select <DDNS>.
Type in the DDNS items according to
the selected type.
Samsung DDNS : Select this if you
use the DDNS server provided by
Samsung Techwin.
Public DDNS : Select this if you use a public DDNS server.
Host Name : Enter the name of the host (i.e., host name of Dyndns) that is
registered with the DDNS server.
1.
2.
3.

y
y
y
y

4.
1.
2.
3.
4.
y
y
-