Samsung SV-DVD3E EN - Manual (Page 7)

GB
Plug & Auto Set up
13
GB
12
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1 Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2 Plug the DVD-VCR into the mains.
Result:
The LANGUAGE SET menu is displayed.
3 Select the required language by pressing the " or ❷ buttons.
4 Press ENTER to store the language selected.
Result:
A message appears.
5 Press ENTER to start the auto scanning.
◆ The number of stations automatically stored by the DVD-VCR
depends on the number of stations that it has found.
6 On completion, press RETURN twice to exit the menu.
➢
◆ Auto preset can be performed by pressing (STOP) on the
DVD-VCR continuously for 5 seconds or more with no tape
inserted.
2
AUTO SET UP
PLEASE WAIT
60 %
I ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ -------I
RETURN
TV
DVD & VCR
Connecting Other Equipment to Your DVD-VCR
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
➢
The RCA input/output connectors on the rear of the DVD-VCR are used for
equipment, such as camcorders, VCRs or sound systems.
REAR OF THE DVD-VCR
Camcorder
VCR
Sound system