Operation – Sony DAV-DZ231 User Manual

Page 78

Advertising
background image

78

GB

The sound comes from the center speaker
only.

• Depending on the disc, the sound may come from

the center speaker only.

No sound is heard from the center speaker.

• Check the speaker connections and settings (page

9, 71).

• Make sure the sound field function is on

(page 26)

.

• Depending on the source, the effect of the center

speaker may be less noticeable.

• A 2 channel source is being played.

No sound or only a very low-level sound is
heard from the surround speakers.

• Check the speaker connections and settings (page

9, 71).

• Make sure the sound field function is on

(page 26)

.

• Depending on the source, the effect of the

surround speakers may be less noticeable.

• A 2 channel source is being played.

There is no sound from the speakers that are
indicated in the front panel display.

• The front panel display indicates the selected

[SPEAKER FORMATION]. It does not indicate
the speakers which output sound (page 26, 62).

Operation

Radio stations cannot be tuned in.

• Check that the antenna (aerial) is connected

securely. Adjust the antenna (aerial) or connect an
external antenna (aerial) if necessary.

• The signal strength of the stations is too weak

(when tuning in with automatic tuning). Use direct
tuning.

• No stations have been preset or the preset stations

have been cleared (when tuning by scanning
preset stations). Preset the stations (page 51).

• Press DISPLAY so that the frequency appears in

the front panel display.

The remote does not function.

• There are obstacles between the remote and the

unit.

• The distance between the remote and the unit is

too far.

• The remote is not pointed at the remote sensor on

the unit.

• The batteries in the remote are weak.

The disc does not play.

• There is no disc inserted.

• The disc is upside down.

Insert the disc with the playback side facing down.

• The disc is skewed on the disc tray.

• The system cannot play CD-ROMs, etc. (page 6).

• The region code on the DVD does not match the

system.

• Moisture has condensed inside the unit and may

cause damage to the lenses. Remove the disc and
leave the unit turned on for about half an hour.

The MP3 audio track cannot be played.

• The DATA CD is not recorded in the MP3 format

that conforms to ISO 9660 Level 1/Level 2, or
Joliet.

• The DATA DVD is not recorded in an MP3

format that conforms to UDF (Universal Disk
Format).

• The MP3 audio track does not have the extension

“.MP3.”

• The data is not formatted in MP3 even though it

has the extension “.MP3.”

• The data is not MPEG1 Audio Layer 3 data.

• The system cannot play audio tracks in MP3PRO

format.

• The [MODE (MP3, JPEG)] setting has been set to

[IMAGE (JPEG)] (page 46).

• If you cannot change the [MODE (MP3, JPEG)]

setting, re-load the disc or turn the system off, then
on.

• The DATA CD/DATA DVD contains a DivX

video file (except for United Kingdom and North
American models).

The JPEG image file cannot be played.

• The DATA CD is not recorded in a JPEG format

that conforms to ISO 9660 Level 1/Level 2, or
Joliet.

• The DATA DVD is not recorded in a JPEG format

that conforms to UDF (Universal Disk Format).

• It has an extension other than “.JPEG” or “.JPG.”

• It is larger than 3,072 (width) × 2,048 (height) in

normal mode, or more than 2,000,000 pixels in
Progressive JPEG which is mainly used on the
Internet WEB site.

• It does not fit the TV screen (those images are

reduced).

• The [MODE (MP3, JPEG)] setting has been set to

[AUDIO (MP3)] (page 46).

• If you cannot change the [MODE (MP3, JPEG)]

setting, re-load the disc or turn the system off, then
on.

• The DATA CD/DATA DVD contains a DivX

video file (except for United Kingdom and North
American models).

Advertising
This manual is related to the following products: