Spectra Logic Spectra 12000 - Manual (Page 119)

Chapter 9. Using the Spectra 12000 Library 119
To eject media through the Library Controller:
1. From the General Status screen, tap Inventory. This brings up the
Inventory screen (Figure 9-5).
2. Tap Total Library in the upper right corner of the screen to display the
pull-down menu (Figure 9-6).
3. Select the partition from which you want to eject media. The
Inventory screen now shows information for the partition you
selected.
4. Use the +/- buttons to select the cartridge pack from which you wish
to eject the media.
Figure 9-5 Inventory screen.
Figure 9-6
Partitions pull-down
menu.