Spectra Logic Spectra 12000 - Manual (Page 130)

130 Spectra 12000 User Guide
3. Use the +/- buttons to select View F-QIP Configuration and tap Run Test.
This brings up the View Diagnostic Trace window, showing the F-QIP
configurations (Figure 9-13).
On this screen you can see the current settings for the F-QIP
configurations, Loop Address, Disable Initiator settings, etc.
Checking Resources in Use
From the Configure Partitions screen, you can identify resources. To do
this:
1. On the Library Controller, tap Toolbars, then tap Configuration. The
Configuration toolbar displays.
2. Tap the Partition icon on the Configuration toolbar. The Shared
Library Services screen displays.
Figure 9-13 F-QIP configuration.