Smeg SE365MF-5 - Manual (Page 28)

58
Instructions for the Installer
Never use the door for leverage when inserting
the oven in the cabinet. Never apply excessive
pressure to the open door.
13.3 Hob-oven connection
Once installed, the combined hob must be connected to the oven. Fit the
oven into the built-in installation opening, leaving enough room to carry out
the operations described below:
connect the yellow-green earth wire of the hob to the oven's earth terminal
A (see figure);
connect the hob connectors to the sockets provided on the top casing of
the oven. The colours and symbols of the connectors must correspond to
those on the oven sockets;
if the hob has a residual heat warning device connector, connect it to the
unused socket on the right-hand side.
At this point the oven can be completely built-into the cabinet, taking care
to place the power supply lead along the best possible route and ensuring
that it is not touching hot parts.