4 extensible firmware interface (efi) bios, 5 enabling and disabling channel ports, Extensible firmware interface (efi) bios – Sun Microsystems SUN NETRA CP3000 User Manual
Page 52: Enabling and disabling channel ports
Advertising

4-6
Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010
4.4
Extensible Firmware Interface (EFI)
BIOS
The AMC.1-HDD SAS disk includes an EFI boot services driver for use with ATCA
blades that feature Intel® IA64 processors. Additional information is available at
4.5
Enabling and Disabling Channel Ports
As shipped from the factory, the AMC.1-HDD SAS disk will not drive AMC channel
ports, due to the default “disable” setting. You can enable these ports using
lsiutil
, a command line utility. For instructions, see
Disabling SAS Ports” on page 1-18
.
Advertising