Setting the flash, Setting the self-timer – Sanyo M1 User Manual
Page 158
Setting the Flash
To activate the flash:
1.
From camera mode, select Options (right softkey) > Flash.
2.
Select one of the following options and press
:
Ⅲ
Off to deactivate the flash.
Ⅲ
On This Shot to activate the flash for one shot.
Ⅲ
On Always to activate the flash for all pictures.
Ⅲ
Auto to activate the flash automatically.
Setting the Self-Timer
To activate the self-timer:
1.
From camera mode, select Options (right softkey) >
Self-Timer.
2.
Highlight the length of delay you want the timer to use (10 Seconds
or 5 Seconds) and press
.
3.
Select Start (left softkey) when you are ready to start the timer. (
appears on the upper right portion of the Main LCD during the self-
timer countdown.)
4.
Get ready for the picture. (When the timer is down to three seconds,
the self-timer icon will turn red and the phone will begin to beep.)
To cancel the self-timer after it has started:
ᮣ
Select Cancel (right softkey).
Note:
While the self-timer is active, all keys are disabled except
Back
,
END
,
and the right softkey button (
Cancel
).
142
Section 2I: Using the Built-in Camera