Sony CHC-TB20 - Manual (Page 14)

14 GB
Setting presets through
manual tuning
1
Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2
Press PLAY MODE/TUNING MODE until
“AUTO” and “PRESET” disappear.
3
Slide the knob to l or to L (or
press m or M on the remote)
repeatedly to tune in the desired
station.
4
Press TUNER MEMORY/DIRECTION.
5
Slide the knob to l or to L (or
press m or M on the remote)
repeatedly to select the desired preset
number.
Preset number
6
Press ENTER/YES.
“Complete!” appears, and the station is
stored.
7
Repeat steps 1 to 6 to store other
stations.
Other operations
To Do this
Presetting radio stations (continued)
4
Press TUNER MEMORY/DIRECTION.
5
Slide the knob to l or to L (or
press m or M on the remote)
repeatedly to select the desired preset
number.
Preset number
6
Press ENTER/YES.
“Complete!” appears, and the station is
stored.
7
Repeat steps 1 to 6 to store other
stations.
Tune in a
station with a
weak signal Follow the procedure described in
“Setting presets through manual
tuning”.
Stop setting
presets Press MENU/NO on the remote.
Stop scanning Press PLAY MODE/TUNING
MODE.
Change the
preset station Start over from step 1.
Change the
preset number Start over from step 1.