SIIG 5.1 - Manual (Page 5)

5
Driver Installation
Windows 2000
1. Boot up Windows, at the Add New Hardware
Wizard, click Cancel, then insert the driver CD.
2. Click Start, Run, type D:\32bit\setup.exe, then
click OK. (Change D: to match the drive letter of
your CD-ROM)
3. At the Welcome screen, click Next.
4. At the Select Components screen, select Install
Envy24 Family Audio Device Driver, then click
Next.
5. At the Choose Destination screen, click Next.
6. Select the restart Windows option, then click Finish.
32-bit Windows XP/Server 2003
1. Boot up Windows, at the Found New Hardware
Wizard, click Cancel, then insert the driver CD.
2. Click Start, Run, type D:\32bit\setup.exe, then
click OK. (Change D: to match the drive letter of
your CD-ROM)
3. At the Welcome screen, click Next.
4. At the Select Components screen, select Install
Envy24 Family Audio Device Driver, then click
Next.
5. At the Choose Destination screen, click Next.
6. If prompted, at the Hardware Installation box,
click Continue Anyway, otherwise go directly to
step 7.
7. Select the restart Windows option, then click Finish.