Messages and signals – Sharp FO-775L User Manual

Page 137

Advertising
background image

Messages and Signals

135

11. T

roub

le-

s

hooti

ng

Messages and Signals

Display messages

Note: If you have turned on the Caller ID function, see Caller ID in
Chapter 8 for display messages related to Caller ID.

CHECK PAPER SIZE

The paper size setting is incorrect. Change the paper

size setting as explained on page 23.

COVER OPEN

The print compartment cover (under the operation
panel) is open. Open the operation panel (grasp the
top and pull toward you), and then press down firmly
on both sides of the print compartment cover to close
it.

DOCUMENT JAMMED

The original document is jammed. See the following
section, Clearing Paper Jams.

FAX RX IN MEMORY

A fax has been received in memory because the
imaging film needs replacement, you have run out of
printing paper, or the paper is jammed. The fax will
print out automatically when the problem is fixed.

FILM END

The imaging film may need replacement. Check the
film and replace if necessary.

FUNCTION MODE

The FUNCTION key has been pressed.

HOLD

The HOLD/SEARCH key has been pressed to put the
other party on hold during a phone conversation.
Press the HOLD/SEARCH again to take the other
party off hold.

LCR DOWNLOADING

The fax machine has called OpenLCR and is
receiving carrier rate data. This message only
appears if you have registered with OpenLCR.

DOWNLOAD ERROR

The fax machine was unable to download rate data
from OpenLCR. Try downloading the data manually
as explained in Downloading (receiving) the rate data
manually
on page 39.

all.book Page 135 Friday, July 14, 2000 11:47 AM

Advertising