Using the blue screen function, On-screen display – Sharp PGD210U User Manual

Page 29

Advertising
background image

E-28

Using the Blue Screen Function

This projector is equipped with a Blue Screen function
that will turn the screen blue when the video input termi-
nal is not connected to anything, or the video component
is turned off.

• Press the MENU button. While the MENU screen is displayed,

press the ADJUSTMENT ƒ/∂ buttons to select “IMAGE
ADJ.”. Then press the ENTER button to display the “IMAGE
ADJ.” screen as shown. Press the ADJUSTMENT ƒ/∂ but-
tons to select “BLUE SCREEN,” and press the ADJUST-
MENT ß/© buttons to select “ON” or “OFF”. Press the MENU
button to return to the normal screen.

• When the Blue Screen function is on, the screen will turn blue

when no video signal is being input through the video input
terminal.

• When the Blue Screen function is on, and no video signal is

input via the input terminal for more than 15 minutes, the
power is automatically turned off.

• The indicators appear as shown each minute before the

power is turned off, from 5 minutes before until 1 minute
before.

Notes:

• The Blue Screen function does not operate in RGB mode.
• When the power is turned off, the POWER indicator will light red.
• To turn the power on again, press the POWER button to set it to OFF,

then press it again to set it to ON.

On-Screen Display

Using the Input Mode On-Screen Display
Override Function

The On-Screen Displays that appear during input select
(“RGB 1,024

ן 768, 75 Hz,” etc.) can be turned off.

Once “INPUT DISPLAY” is turned off, the On-Screen Dis-
plays will not appear even if the INPUT CHECK button on
the remote control is pressed.

• Press the MENU button. While the MENU screen is displayed,

press the ADJUSTMENT ƒ/∂ buttons to select “IMAGE
ADJ.”. Then press the ENTER button to display the “IMAGE
ADJ.” screen as shown. Press the ADJUSTMENT ƒ/∂ but-
tons to select “INPUT DISPLAY,” and press ADJUST-
MENT ß/© buttons to select “ON” or “OFF”.

• When OFF is selected, the On-Screen Display (“RGB

1,024

ן 768, 75 Hz,” etc.) will not be displayed during input

select.

B L U E S C R E E N

B L K S C R N D I S P

I M A G E A D J .

R E V E R S E

I N V E R T

I N P U T D I S P L A Y

[ O F F ]
[ O F F ]

[ O F F ]

S Y S T E M

[ O F F ]

[ O N ]

: S E L .

: A D J .

: E N D

MENU

REMAIN 5M

REMAIN 4M

REMAIN 1M

B L K S C R N D I S P

I M A G E A D J .

R E V E R S E
I N V E R T

I N P U T D I S P L A Y

: S E L .

: A D J .

: E N D

MENU

[ O F F ]

[ O F F ]

[ O F F ]

[ O F F ]

Advertising