Sharp MD-MT866H - Manual (Page 25)

25
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Basic Operation
– Playback –
Notes:
● If power failure occurs whilst playing a disc using the AC
adaptor, disconnect it from the wall socket. Otherwise, play-
back may start automatically when electricity resumes.
● If you connect the AC adaptor without installing the re-
chargeable battery, playback may start automatically. Be
sure to turn off the power.
● Reduce the volume before starting to play. MiniDiscs, com-
pared to ordinary cassette tapes, have very little noise. If
the volume is adjusted according to your usual expecta-
tions of noise, high volume may damage your hearing.
● The sound escaping from your earphones may annoy
people around you.
In particularly crowded places (such as on trains or
buses), reduce the volume.
1
Insert the earphones plug firmly into the
earphones socket on the remote control
unit.
2
Plug the remote control into the socket
on the unit.
3
Insert a MiniDisc (page 17).
4
Press the
06 06 06 06 06
button.
● Playback starts automatically with a playback only
MiniDisc or a MiniDisc which is protected against
accidental erasure (Auto-play function).
Volume control
Move the left shuttle switch to VOL+ to increase the
volume and the left shuttle switch to VOL– to de-
crease the volume.
To interrupt playback
Press the
06
button.
● To resume playback, press the
06
button again.
To stop playback
Press the •
■ / :OFF button.
● If the unit is not operated for at least 2 minutes whilst
in the stop mode, the power will shut off automatically.
To turn off the power
Press the •
■ / :OFF button whilst in the stop mode.
Playback : continued
Bass control
Each time the left shuttle switch is pressed toward
“BASS
” (Remote control: the SOUND button is
pressed), the tone will be switched as follows.
BASS 1 Emphasised slightly
BASS 2 Emphasised more
BASS 3 Emphasised fully
BASS OFF Cancelled
Volume (0 - 30)