Sharp MD-MT866H - Manual (Page 44)

44
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Editing a Recorded MiniDisc
1
Start playing the track to be erased, and
press the
06 06 06 06 06
button.
2
Press the EDIT button repeatedly to select
“ERASE”.
3
Press the right shuttle switch toward
“ENTER/SYNC”.
● To cancel the operation, press the • ■ / :OFF button.
4
Press the right shuttle switch toward
“ENTER/SYNC” again.
● The track will be erased.
5
To erase other tracks, repeat steps 1 - 4.
1
Whilst in the stop mode, press the EDIT but-
ton repeatedly to select “ALL ERASE”.
2
Press the right shuttle switch toward
“ENTER/SYNC”.
● To cancel the operation, press the • ■ / :OFF button.
3
Press the right shuttle switch toward
“ENTER/SYNC” again.
● All of the tracks will be erased.
Caution:
Once a track has been erased, it can not be recovered.
Check the track number before erasing it.
To erase tracks one at a time To erase all of the tracks at once
Advanced Features
– Editing a Recorded MiniDisc –