Shooting ( ), Setting aeb area, Auto focus type – Samsung WB5500 User Manual
Page 57
056
å
High resolution and picture quality increases fi le saving time,
which increases stand-by time.
å
If the [Continuous], [High-speed], [Motion Capture], [AEB] sub
menu is selected, the fl ash will be off automatically.
å
If less than 3 pictures are available in the memory, the AEB
shooting is not available.
å
It is best to use a tripod for the AEB shooting as the time to save
each image fi le is longer and blurring caused by camera shake
may occur.
Setting AEB area
The ranges and intervals of three photos can be set during AEB shooting.
- Set a standard for the exposure bracket
by pressing the LEFT/RIGHT buttons.
- Set a range for the left and right exposure
bracket by using the Smart Dial.
Auto Focus type
You can select your preferred Focus Area according to the shooting
conditions.
[Center AF] (
) : The rectangular area in the
center of the LCD monitor
will be focused
[Multi AF] (
) : This camera selects all of
available AF point from the 9
AF points.
[Selection AF] (
) : Focus on the desired position of the LCD monitor.
[Tracking AF] (
) : The focus moves along with the movements of a
subject.
Ä When the camera focuses on the subject, the auto focus frame
turns to green. When the camera doesn't focus on the subject, the
auto focus frame turns to red.
Ŷ How to Enable Selection AF
After setting [Selection AF], press the OK
button and then the screen for setting the
location of a focus frame will appear.
Press the Up/Down/Left/Right button to
move the focus mark to the desired position.
Press the shutter button to enable Selection
AF. Once setting is complete, the focus mark
will be fi xed at the position set.
Shooting (
)
-2 -1 0 +1 +2
AEB Area
Back Move
Focus Area
Back Move
Focus Mark
Move Set