Samsung WB5500 - Manual (Page 72)

071
You can turn on and off the Auto Focus lamp.
- Sub menus
[Off] : The AF lamp will not light up in
low light conditions.
[On]* : The AF lamp will light up in low
light conditions.
Auto Focus lamp
Settings ( )
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC) is an AV network system which controls all your
connected SAMSUNG AV devices when using the TV remote control
that supports Anynet+. When connected to the SAMSUNG HDTV, you
can operate the playback functions by using the TV remote control.
Ŷ How to use the Anynet+ (HDMI-CEC)
1. Connect your camera to your HDTV using an optional HDMI cable.
(p.72)
2. TV turns on as soon as the power button is pressed on the camera.
3. If there is no picture after turning on the TV, press the source button
on the TV remote control to change to the HDMI mode.
- Depending on the TV, it might not change to the HDMI mode
although you press the source button.
4. When you select the camera menu of Anynet+ using the TV remote,
a play menu screen appears on the TV.
- The playback menu appearing on TV screen operates the same
function of the camera.
Ɣ Only available when using the TV that supports Anynet+ (HDMI-CEC).
(Not available by using TV that supports Anynet)
Ɣ For more detailed information of the HDTV connection, see the
user manual of HDTV.
5. Select the desired playback function by using the remote control of
the TV.
- To select the sub menus, move to the desired playback menu and
then press the Enter button.
Back Set
AF Lamp :On
Anynet+ (HDMI-CEC) :On
HDMI Size :1080i
Video Out :NTSC
USB :Auto
Auto Power Off :3 min
Off
On