Sony DVP-FX1021 - Manual (Page 24)

Playing a Disc
- Prepare the power supply.
1. Open the outer cover and slide the POWER
switch to the left to turn the unit on.
Indicator lights and then the indicator will disappear after
5 seconds.
2. Press OPEN to open the disc lid and insert a disc
onto the side you want to play, label up. Close the
disc lid by hand.
•
If the disc is placed in upside down (and it is a single-
sided disc), “NO DISC” or “Disc Error” appears on the
LCD screen.
3. Press PLAY to start play.
• After playing back all of the chapters in the title, the
DVD player automatically stops and returns to the
menu screen.
4. Adjust the volume.
• Reduce the volume before playback, then gradually
increase it.
After operation
When the unit is not in use, remove the disc and slide the
POWER switch to the left and hold it there to turn off the
DVD player.
When a menu screen appears on the LCD
screen.
In case of interactive DVDs with control,
a menu screen appears on the LCD screen.
Press B / V / v / b and press ENTER, or press the number
buttons, to select the desired item.
Playback of the selected item begins.
For further information, also refer to the jacket or case of
the disc you are playing.
Use the number buttons to select the track you want to
view and press RETURN to return to the menu screen.
Menu settings and operating procedures may differ. Follow
the instructions on the each menu screen. You also may set
PBC to Off (See “PBC” on page 45).
VCD
DVD
24
Basic Playback
1
2
3 4
LCD MODE
COLOR/BRIGHT
V O L U M E
D o w n U p