Sony DAVX10 User Manual

Page 77

Advertising
background image

Ad
v

a

nce

d

Sett

ings

and

Adjus

tme
nts

masterpage:Right

specdef v20060111

filename[G:\FM\Sony\0605\DAVX10_US\Source\3210565131\3210565131DAVX10\gb12adv.fm]

model name [DAV-X10]

[3-210-565-13(1)]

77

US

x The measurement is OK.

Unplug the calibration mic, then select
[YES]. The result is implemented.

x The measurement is not OK.

Follow the message, then select [YES] to
retry.

Note

• While the Auto Calibration function works:

– do not turn off the power.

– do not press any button.

– do not change the volume.

– do not change the function.

– do not load or eject a disc.

– do not unplug the calibration mic.

• Depending on the acoustics of the room, the

displayed distance may not represent the actual
distance.

To select the auto calibration
setting mode

You can select the auto calibration setting mode.

1

Press SYSTEM MENU.

2

Press

X/x repeatedly until “A.CAL MODE”

appears in the front panel display, then
press

or

c.

3

Press

X/x to select a setting.

The default setting is underlined.

• “A.CAL ON”: reflects the setting that is set by the

auto calibration.

• “A.CAL OFF”: returns to the default speaker

setting, regardless of the speaker setting made by
the auto calibration function.

4

Press .

5

Press SYSTEM MENU.

The system menu turns off.

Note

• If “Setup A.CAL” appears in the front panel display,

perform [AUTO CALIBRATION]. For details, see
page 75.

• When you perform [AUTO CALIBRATION],

“A.CAL MODE” is set to “A.CAL ON”
automatically.

To adjust the subwoofer level

1

Press SYSTEM MENU.

2

Press

X/x repeatedly until “SW LEVEL”

appears in the front panel display, then
press

or

c.

3

Press

X/x to adjust.

Adjusts the subwoofer level (–6.0 dB – +6.0 dB, 0.5
dB increments).

The adjusted value appears in the front panel
display.

4

Press .

5

Press SYSTEM MENU.

The system menu turns off.

Note

• When you perform [AUTO CALIBRATION], the

subwoofer level setting is readjusted.

FRONT L :
FRONT R :
SUBWOOFER :

If OK, unplug calibration mic and select
“YES”.

YES

10 / ft 3.12m 0.0dB

1 4

11ft 3.35m + 0.5dB
11ft 3.35m + 1.0dB

Measurement complete.

NO

Check front speaker connection.
Retry?

YES

Measurement failure.

NO

Advertising
This manual is related to the following products: