Connecting the video cord, Connecting the audio cords – Sony DAVX10 User Manual
Page 26
masterpage:Left
specdef v20060111
filename[G:\FM\Sony\0605\DAVX10_US\Source\3210565131\3210565131DAVX10\gb05gsa.fm]
model name [DAV-X10]
[3-210-565-13(1)]
26
US
Connecting the video cord
To connect the VIDEO OUT jack of another component to the VIDEO IN
or SAT/CABLE IN jack of this unit
Connect a VCR or other component to the VIDEO IN or SAT/CABLE IN jack using a video/audio cord
(not supplied).
When connecting a cord, be sure to match the color-coded sleeve to the appropriate component jack.
Note
• The video signal that is input from the VIDEO IN or SAT/CABLE IN jack is output from the VIDEO (MONITOR
OUT) jack only.
Connecting the audio cords
The quality of the audio increases from A to B, C.
A
To connect the AUDIO OUT jacks of other component to the AUDIO
IN jacks of this unit
Connect a VCR or other component to the AUDIO IN jacks using an video/audio cord (not supplied).
When connecting the cords, be sure to match the color-coded sleeves to the appropriate component
jacks.
B
To connect the COAXIAL DIGITAL OUT jack of a component to the
DIGITAL IN COAXIAL jack of this unit
Connect the component to the DIGITAL IN COAXIAL jack using a coaxial digital cord (not supplied).
C
To connect the OPTICAL DIGITAL OUT jack of a component to the
DIGITAL IN OPTICAL jack of this unit
Connect the component to the DIGITAL IN OPTICAL jack using a optical digital cord (not supplied).
Note
• When you connect to the SAT/CABLE DIGITAL IN OPTICAL or COAXIAL jack, set the switch on the rear panel
accordingly.
Yellow (Video)
White (L/Audio)
Red (R/Audio)
SAT/
CABLE
DIGITAL IN
COAXIAL
COAXIAL
OPTICAL