Sony Atrac3/MP3 CD Walkman D-NE520 - Manual (Page 27)

Items Options (: Default settings)
POWER SAVE
(The OPERATION
lamp on the
player) 1)
 OFF On the CD player, the display lights up for about 10 seconds,
then turns off. The OPERATION lamp on the player remains lit.
1 On the CD player, the display does not light up.
2 On the CD player, the display does not light up. Furthermore,
the SOUND settings are not effective.
PLAY ORDER
(Playback order) 1)
TRACK  NORMAL Play back the music source in the order of
recording.
ID3tagTNO Play back in the order of ID3 tag number.
FILE NAME Play back in the alphabetical order of the
file names.
GROUP  OFF Play back the music source in the order of
recording.
ON Play back the music source in the order of
group names.
CD-EXTRA 1) 4)
(Playback by disc
format)
 OFF Set to “OFF” as long as you can play your CD normally.
ON If you cannot play your CD-Extra, set to “ON.” You may play it.
1) You can set this up only while the player is stopped.
2) AVLS is an abbreviation of the Automatic Volume Limiter System.
3) This function works only for ATRAC CDs.
4) This function works only for audio CDs and CD-Extra CDs.
Notes
• Even if “G-PROTECTION” is set to “2”, sound may skip:
– when the CD player receives stronger continuous shock than expected,
– when a dirty or scratched CD is played, or
– for CD-Rs/CD-RWs, when a poor-quality disc is played or there is a problem with the original recording
device or application software.
• Even if “SEAMLESS” is set to “ON”, the tracks may not play continuously depending on how the source
music was recorded.
27
Playback
D-NE520.GB.2-541-629-13(1)