Siemens Hicom cordless EM - Manual (Page 30)

30
Switching functions
Like other Hicom telephones, the mobile unit allows you to
perform the following functions by entering codes. The codes
in your system may deviate from the standard codes speci-
fied here. Consult your system administrator if you have any
queries about the codes in your system.
The confirmation tone indicates a successfully com-
pleted function. The error tone is audible in the event of a
malfunction, see also page 62.
You can store frequently used functions as short cuts (see
page 43) or as Select Service functions (see page 54). This
depends on the status of the mobile unit when the function is
started. The functions in this overview are, therefore, marked
with (Short cut) or
to indicate how they are stored.
Overview - code functions
Functions*
Standard
code
System-
specific
code**
Accept call waiting (Short cut)
Answer call from a (second) waiting
party (second call).
Anklopfen verhindern
Anklopfen erlauben
"
* 55
#490
* 490
Do not disturb on
off
Prevent incoming calls.
* 97
#97
Call forwarding on
all calls
external calls only
internal calls only
Call forwarding off
Forward calls to an other telephone.
* 11+ph. no.
* 12+ph.no.
* 13+ph.no.
#1
Call distribution (ACD)
Register (beginning of work period)
De-register (end of work period)
Temporary de-registration
Acknowledge after de-registration
Request wrap-up time
Acknowledge wrap-up time
ACD night service
on
off
Distribute call in a team.
*
401
#401
*
402
#402
*
403
#403
* 404
#404
Associated service
Activate or deactivate functions for
other telephones. * 83+
partner+
services
procedure...
?R?
?R?
?R?
?R?
?R?