Sony S-FRAME DPF-V900 - Manual (Page 27)

27 GB
Ad
va
nce
d
o
pera
tio
ns
Advanced operations
AUTO TOUCH-UP
What is AUTO TOUCH-UP?
AUTO TOUCH-UP is a feature for performing
the following four corrections automatically at
the same time. It is not possible to adjust the
level for each of the corrections manually.
Skin smoothing: Automatically recognizes face
parts, and adjusts the skin tone for a smoother look.
Backlight correction: Adjusts the brightness by
using the face detect function.
Focus correction: Improves the focus of an out-of-
focus image to create a better-focused image.
Red-eye correction: Automatically detects faces and
corrects red-eye caused by the flash.
1
Display the image you want to
correct as single image display.
2
Press MENU.
The menu is displayed.
3
Press v/V to select [AUTO TOUCH-
UP] and then press .
Correction of the selected image begins
and then the image before correction
appears on the left and the corrected
image appears on the right.
Note
Depending on the image, it may take a while for
the correction.
4
Press v/V to select [Save] and then
press .
The corrected image is saved as a new
image.
To return to the original image
(image before correction)
Select [Cancel] and then press .
Tips
• The original image is the same as it was before
correction.
• The corrected image is saved in the same device as
the image before correction.
• To perform this operation from the photo frame,
press MENU, press the direction buttons to select
the item, and then press
ENTER.
Notes
• Depending on the image, the faces of people may
not be able to be detected automatically.
• Depending on the image, focus correction may not
be able to be performed properly. Focus correction
is not effective for blurring caused by shaking of the
camera.
• Depending on the image, red-eye correction may
not be possible.
The automatic red-eye correction of
this photo frame uses the technology
of FotoNation Inc. in the U.S.A.
The skin smoothing correction of the photo frame
uses the technology of Ichikawa Soft Laboratory.