Fitting to a tripod, Removal – Sony 300PF User Manual
Page 41
Advertising
Chapter 2 Fitting and Connections
Chapter 2 Fitting and Connections
41
VCT-U14 Tripod Adaptor
Side the camcorder forward
along the slot, until it clicks
firmly into place.
Tripod
Hold down the red button
and pull the lever in the
direction of the arrow.
Pin
Fitting to a Tripod
First fit the VCT-U14 Tripod Adaptor to the tripod,
then mount the camcorder on the tripod adaptor.
Removal
Note
After removing the camcorder, if the tripod adaptor pin
has not returned to its original position, hold down the
red button and move the lever in the direction of the
arrow to return the pin to its original position. It is not
possible to mount a camcorder with the pin left out.
Advertising