Scanning and transmitting a two-sided original – Sharp 4501 User Manual

Page 13

Advertising
background image

11

NOTES
• Booklets and tablets

Two-sided originals that are bound at the side are booklets, and two-sided originals
that are bound at the top are tablets.

• Two-sided scanning turns off after the document is stored in memory. Pressing the

CA key will also cancel two-sided scanning.

Booklet

Tablet

SCANNING AND TRANSMITTING A TWO-SIDED ORIGINAL

A two-sided original can be automatically scanned and transmitted using the auto document feeder. Follow the steps
below.

SENDING AN IMAGE

1

Make sure the machine is in scanner mode and
then load the document in the auto document
feeder.

2

Touch the ORIGINAL key.

AUTO 8 X11

1

/

2

ORIGINAL

STANDARD

RESOLUTION

When you touch the
ORIGINAL key, check the
original size displayed in the
key.

3

Touch the 2-SIDED BOOKLET key or the 2-
SIDED TABLET key as appropriate for the
original you loaded.

AUTO

MANUAL

2-SIDED
BOOKLET

2-SIDED
TABLET

ORIGINAL SIZE

If necessary, touch the
MANUAL key and set the
original size. (Page 13)

4

Touch the OK key.

OK

ED

L

You will return to the initial
screen.

A two-sided original icon appears next to the ORIGINAL key.
(Example: The icon that appears when the 2-SIDED

BOOKLET key is touched.)

AUTO 8 X11

1

/

2

ORIGINAL

STANDARD

RESOLUTION

5

Continue from step 4 of "Basic transmission
method" (pages 8 to 9).

Advertising
This manual is related to the following products: